Flipper Zero
Firmwares
- Flipper Zero Firmware
- Flipper Zero Unleashed Firmware
- Flipper Zero FW RogueMaster
- Flipper Zero Xtreme-Firmware
- Flipper Zero Momentum-Firmware
Firmware Update - PC
- Update to the latest firmware using https://flipperzero.one/update
- Download and install qFlipper
- Connect your Flipper Zero via USB, update to the official firmware
- Disconnect from USB, power off the Flipper Zero, and remove the SD to prepare it for flashing.
- Download the latest RogueMaster firmware from their Github Page.
- Unzip the downloaded .zip and copy the content into /update of the Flipper SD card (including the .dfu)
- On the Flipper Zero, once booted, press down, and left until you are on the 'Browser' screen. Scroll down until you see the 'update' directory and click on it.
- You should now see the contents you uploaded and an 'update' option. Hover over the 'update' option, click the center button on your Flipper, once again on the 'Run in App' option.
Firmware Update - WebUpdater
GPIO
Videos
- Flipper Zero: Want some good news? - Penthertz
- Flipper Zero: is this for you? Follow our 1st tests! - Penthertz
- Flipper Zero: french collection video on the Flipper Zero, tutorial and explain
Tutorials and Resources
- Flipper Zero Hacking 101 - pingywon
- Flipper Zero Playground - UberGuidoZ
- Flashing Flipper Zero with RogueMaster CFW
- Unleashed Firmware - Update firmware
IOC
MAC addresses from IEEE for Flipper Zero: 0C:FA:22:XX:XX:XX
.
This applies to Bluetooth, Ethernet, WiFi interfaces.
0C-FA-22 (hex) FLIPPER DEVICES INC
0CFA22 (base 16) FLIPPER DEVICES INC
2803 Philadelphia Pike Suite B #551
Claymont 19703
US