Skip to content

iCopy-X

iCopy-X is a "super" automated handheld RFID copier based on Proxmark3. iCopy-X can read, crack, duplicate, sniff and simulate without the use of a PC.

Update

Latest firmware: 1.0.90 2022-08-16

Step 1: Enter the device S/N (found under the “About” menu) on the website and download the upgrade package to your PC.

Step 2: Connect the iCopy-X to your computer using the supplied USB TYPE C cable and delete any files that end in “.ipk” from the root directory.

Step 3: Copy the newly downloaded upgrade package to the root directory.

Step 4: Press "Ok" on the second page of the "About" menu on the iCopy-X to start the automatic upgrade.

TIP: Ensure that the serial number has been entered correctly before starting as this could cause the upgrade to fail.

PC Mode

In PC-Mode, after connecting to the computer, open the client in the built-in U disk, you can directly use the Proxmark3 universal CMD to operate.

COM Port (Check Device Manager, numbers only):  4
[=] Session log E:/CLIENT_X86/.proxmark3/logs/log_20240730.txt
[+] loaded from JSON file E:/CLIENT_X86/.proxmark3/preferences.json
[=] Using UART port /com4
[=] Communicating with PM3 over USB-CDC
[usb] pm3 -->

References